NORDTEK DANMARK - EI42 - Encapsulated PCB Mount 50/60Hz Transformer - 5.4-8.5VA -

Tell a friend Enquiry print

EI42 - Encapsulated PCB Mount 50/60Hz Transformer - 5.4-8.5VA

Our comprehensive selection of products also includes a series of EI42 safety transformers for PCB mounting.

High-quality encapsulated vacuum potted transformers. Output power from 4.6VA.

  Pin and Transformer Height - EI42 Transformer   Print Layout - EI42 Transformer   EI42 - Encapsulated PCB Mount 50/60Hz Transformer - 5.4-8.5VA  
View from PCB   Solder pins 0.8 mm Ø  - Grid 5 mm

Type Max Ambient Temperature Pin Connections Pin Connections DVE * Stack
(H) mm
 EI42-12A/7.../... 70°C/B 6...36V - 5.40 VA 2x6...18V - 2x2.30 VA x nkf 14.8 31.5 196
 EI42-12F/7.../... 70°C/B 6...34V - 5.80 VA 2x6...17V - 2x2.90 VA x bkf 14.8 31.5 196
 EI42-32A/7.../... 70°C/B 6...39V - 7.40 VA 2x6...19V - 2x3.70 VA x nkf 20.0 38.0 255
 EI42-32F/7.../... 40°C/B 6...37V - 8.50 VA 2x6...18V - 2x4.25 VA x bkf 20.0 38.0 255

  • Approved to EN 60742
  • Vacuum cast
  • Two chamber coil
  • Safety class II
  • Protective system IP 00
  • Conditionally short-circuit proof (*bkf) through built-in temperature fuse,
    or not short-circuit proof (*nkf) but protected by external fuse on primary or secondary

Note: If using the conditionally short-circuit proof transformer type (*bkf), no strip conductors may be guided between the primary connecting pins on the component insertion side, because in this area there is an unprotected live soldering terminal.

Variants available on request

Top of page