Nordtek

 

Arctic 18-65W

Return to normal view

Electronic Starter for fluorescent tubes from 18-65W to be used at low temperatures


The ARCTIC TubeSaver is designed to fully pre-heat the lamp cathodes in the tube to their working temperature, before applying a controlled voltage pulse to successfully strike lamps in extremely low ambient temperatures. This method of ignition prevents unnecessary damage on the cathode inside the tube and significantly prolongs the lifespan of the tube.

ARCTIC TubeSaver also works as a fluorescent lamp safety starter as it has a built in safety monitoring system, which shuts down the system in the event of a fault. This prevents dangerous overheating and the annoying flickering, which is associated with the old-fashioned glow type starters.

Is used:

Cold storage rooms and other surroundings where very low temperatures occur.


Notice:

Disadvantages - None, only advantages!

- Ordinary glow starters can immediately and very simply be substituted with TubeSaver. -

 Data


 Operating voltage:
 Pre-heat time:

 Operating temperature:
 Pulse height:
 Safety shutdown:
 For Lamp types:

 200-260V ac 50/60Hz
 approx. 2 seconds at 20°C
 approx. 3 seconds at -50°C
  -50°C to +75°C
 1500V max
 within 3.5 seconds
 18W tubes to 65W tubes - see sheet



See TubeSaver Intro here
See Compatibility Sheet here
See Detailed Explanation here

Top of page